Steil had to overcome a major challenge on 3/12/2010. A 17-tonne prefabricated garage (dimensions: 6 m x 3 m x 3 m) had to be transported to its destination in Trier-Olewig. The extremely narrow on-site crane platform ...
04.-06.05.2010 Construction of a pedestrian bridge in Saarbrücken
Construction of a pedestrian bridge in Saarbrücken. A three-day operation using the Terex-Demag CC 2800-1 crawler crane to build an 82.4-tonne pedestrian bridge in Saarbrücken. The crane, with an extension of 32 m ...
12.08.2009 Loading of a generator at the Hahn Airport A
Liebherr (LTM 1400-7.1) 400 t and a Demag (AC 250-1) 250 t with tandem hoisting were used for the loading on 2009.08.12 at the Hahn Airport.
The LTM 1400 was equipped with 130 t and the AC 250 with 96.6 t counterweights...
New construction of a second sluice chamber with tandem hoisting using
an AC 250 (250t) and an AC 200 (200t). A 47-t radial lock gate was lifted
into the 14-m-wide chamber...
22.01.2009 Sophisticated heavy-duty transportation for the St-Avold
large thermal power plant
Steil Kranarbeiten set new standards for block 2 of the France's largest gas and steam turbine thermal power plant in St-Avold. A turbine (220t) and a generator (350t) had to be loaded...
Erection of a wind turbine type Enercon E 66 on a 98 m concrete tower with a generator weighing 50 t.
This structure was erected by means of a Terex-Demag TC 2800-1…
Synchronous lift of a 450-t gantry crane in Andernach. All planning, coordination and execution was executed by Steil Kranarbeiten.
2006/05/-- Columns being loaded in the Saar harbour of Dillingen
An 85-t-column was loaded from a barge on to a boiler bridge by 2 x 200 t of crane truck by means of a tandem hoist in the harbour of Saarlouis-Dillingen on the river Saar. Dimensions of the column: Length: 22.33 m, width: 4.89 m.
2005/09/21 Deployment of a crane in Trier at the Rheinische Landesmuseum
Several 1.3-t air-conditioning subassemblies were lowered through an opening in the 13-m high roof of the regional museum from the cramped inner courtyard of the museum by means of a newly developed and compactly built Liebherr LTC 1055-3.1 s telescopic crane and then transported to their destination in the building with manual lift trolleys...
2005/02/17 Deployment of a crane at the head office in Trier
A LTM1220 was employed to lift several refrigeration units weighing 2.3 t up to 45 m into the roof of the head office at a height of 25 m. The boom length from centre of the dolly of the crane was 62 m and the crane had a main boom of 60 m, an outreach angled at 45 ° with a length of 29-m and a 54 t counter weight.
2004/05/13 122 ton colossus en route to Vianden
Last night a nine-metre long, 3.65-metre wide and 4.5-metre high colossus with a weight of 122 metric tons was transported to Bech-Kleinmacher and Vianden.
There the unit will be used to replace a faulty transformer...
2002/07/16 Crane operation in Hoppstädten near Birkenfeld
A Demag AC 650 equipped with 100 t counter weight and 24 m of cantilever, and a Liebherr LTM 1300 (112.5 t of counter weight) were used to erect a 125-t boiler and then to lift it with its 14 m boom over a 16.5-m high wall and position it 5 m behind the wall...
2002/07/05 Crane operation in Hoppstädten near Birkenfeld
A Demag AC 200, a Liebherr LTM 1100, a Liebherr 1160 and a Liebherr LTM 1300 were employed to lift 2 boilers each with a length of 18.50 m, a width of 3.50 m, a height of 3.50 m and a weight of 63 t from the truck...
